The mapping is tailored to the modifications and engine to achieve the best possible performance, torque history and durability for each setup.
Modified are, among other things, the maps for injection, ignition, VANOS, boost pressure control, torque monitoring (this is raised and adjusted to the setup and not just disabled).
The power, torque or boost pressure can be adjusted according to your wishes. The maximum power also depends heavily on the installed tuning parts. A rough estimate of the resulting maximum performance can be clarified in advance via the contact form.
From our side very great emphasis is placed on durability and constant power output. We are happy to discuss projects in advance to find a common denominator of expectations and implementation.
Procedure: Based on the information about your vehicle, a basemap will be created and sent to you by e-mail. If further points are considered when loading the basemap, it will be described in the e-mail with the basemap.
- The first version should then be logged 2x in 3rd gear and 2x in 4th gear, each from 2500rpm to just before the limiter.
- the Logs afterwards please send an email to back to us
- Based on the logs, a new version is created, which then has to be logged again as described above
The whole thing will repeat itself several times until a map is completed, with which all parties are satisfied.
Stock Turbos (0)
Upgrade Turbos (Pure / VTT / Big Boost / Speedtech...) w/Stock Solenoid (100)
Single Turbo w/EBC (100)
Single Turbo w/BoostBOX (150)
Custom JB4 Map (Map Only, No JB4 user Interface Support) (-100)
Octane Rating Map 1
Methanol Charge Pipe Only (0)
Port Methanol Injection - ProMETH.com or generic kit (0)
E85 CPI - Fuel-IT.biz w/AIC controller (0)
E85 Port Injection (0)